Trending Hearth Combating Alarm Smoke Detector Wi-fi
Note before purchasing:
This product only works with a host. If you do not have a host. please purchase one first.
This product is scompatible with:
Mix Box WIFI Home Security System Alarm Wireless IP GSM System Kit
Power: 9V alkaline or carbon zinc battery standby current: <10uA
Working current: <30mA
Smoke sensitivity: || grade
Launch distance: > 100 meters (open air)
Working temperature: -10 ° C ~ + 50 ° C
Relative humidity: <95% RH
Alarm sound: = 85dB
Transmission frequency: 433MHz 1527/2262 Reference standard: EN 14604-2005
Low voltage alarm: When to release the wireless LV code
The battery voltage is below 7.5 + 0.3V; in the LV state. the device will release the wireless LV every 12 hours.
Battery life: at least 1 year
To select the correct mounting area. first make two holes in the top or wall. then insert the plastic expansion tube into the hole and let the mounting plate.
Near the wall. insert the screw into the hole.
Tighten the screws to secure the bracket. The detector is a compact device that does not allow opening. Before installing. please gently press the test button to check if the device is working properly.
Work. test and maintenance procedures:
The detector is already running after installation and the LED flashes every 45 seconds. When burning particles are detected. the detector emits a loud pulsation alarm until the air is cleaned again.
Test: Press the test button to trigger an alarm signal. the detector will sound an alarm. and the LED will flash quickly and release the wireless signal. Release the test button. the device will stop alarming and flash; or blow smoke into the detector room to test the device (LED will continue to flash for 11 seconds. then send the wireless code) Recommendation: Test once a week to ensure the reliability of the detector.
Avoid installing in the following locations:
- It is not allowed to be installed near doors. windows. fans. etc.. as the fast airflow may affect the sensitivity.
- High-humidity places. such as toilets. lofts and other high-temperature places. The temperature should be -10 ° CSTS + 50 ° C.
- Please clean the detector with a soft brush every six months to ensure the sensitivity and service life of the product. Note: Remove the battery before cleaning.
Frequently asked questions:
If there is no sound after pressing the test button. please check if the power is normal.
Various reasons. including but not limited to environmental conditions. such as interruptions or tampering. can affect performance. It is recommended that the user take all necessary precautions to ensure the safety of his/her property.
What’s in the box?
1 x Wireless smoke detector
Only logged in customers who have purchased this product may leave a review.